PanaVise 315 Circuit Board Holder

PanaVise 315 Circuit Board Holder

Regular Price: $35.99 | Price with discount: $30.99 | You Save: $5.00 (14%)

Got a Question for me? Powered by Aol.com   Product Details Height (bottom of shaft to tip of arms): 10.875 (276.2mm). Weight: 1.0 lb. (0.5kg) Shaft is 4.125 (104.8mm) long and 5/8 (15.9mm) in diameter Limited Lifetime Warranty! Arms move independently and feature V shaped grooves Hold circuit boards up to 12-Inch (304.8mm) wide and up to 0.156 (4mm) thick This item is eligible for FREE SHIPPING Sale Price: $30.99You Save $5.00 (14%) Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

Nice for larger projects
I've been very impressed by PanaVise's products, the circuit board holder included. I purchased the circuit board holder after taking on some larger projects that were a bit to big for their small vise. The circuit board holder was a bit larger than I expected and I'm actually using it to wire some panels for an analog synth as well using for the intended pcb use. I'm using this with their 300 series base and it works well. Note that with larger projects the vise will become top heavy and its necessary to attach the base to a larger surface to get the stability you will want.
Top to learn more

November 10, 2009 (IN, USA) | Helpful Votes: 3 | Rating: 5

Great for PCB bench work!
Makes PCB repair a breeze by keeping both hands free for the iron and removing old components. Couldn't have done the last project without this gem!
Top to learn more

August 11, 2010 (Switzerland, Zurich) | Helpful Votes: 2 | Rating: 5

Vauable Extension
The PanaVise 315 Circuit Board Holder is a valuable extension to a standard PanaVise base. Especially the quick-release lever is very useful. The only feature that is missing is a way to quickly flip the board over. The first time is used the PV315, I soldered 64 tiny LEDs onto a Euro-PCB and I fell in love with it. I can't imagine soldering without it anymore.
Top to learn more

January 30, 2010 | Helpful Votes: 2 | Rating: 5

Product Description

PanaVise is a major manufacture of Vises and Work Holding Tools. PanaVise's Tilt, Turn & Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! All PanaVise Products are covered by a Limited Lifetime Warranty! Introducing the Panavise 315 CIRCUIT BOARD HOLDER, Circuit Board Holders help you work quicker and smarter! The best holder ever created for working with circuit boards, this model fits all 300 series Bases. Hold circuit boards up to 12-Inch (304.8mm) wide and up to 0.156 (4mm) thick. Arms move independently and feature V shaped grooves. Notches positioned at the arm tips conveniently hold small parts. Ratcheted pivot holds board horizontally, vertically or any angle in between. Shaft is 4.125 (104.8mm) long and 5/8 (15.9mm) in diameter. Compatible with all 300 series Bases. Height (bottom of shaft to tip of arms): 10.875 (276.2mm). Weight: 1.0 lb. (0.5kg). Limited Lifetime Warranty! Top to learn more

PanaVise 324 Electronic Work Center

Regular Price: $91.99 | Price with discount: $81.99 | You Save: $10.00 (11%)

Got a Question for me? Powered by Aol.com   Product Details Circuit Board Holder Tilts 90 degrees, Turns 360 & Rotates 360 Includes a 315 Circuit Board Holder, a 300 Standard Base, a 312 Parts Tray Base Mount, and a 371 Solder Station Height: 13.5-Inch (342.9mm) Weight: 4.5 lbs. (2kg) Limited Lifetime Warranty! Single control knob and exclusive split-ball locks the Circuit Board Holder firmly into place This item is eligible for FREE SHIPPING Sale Price: $81.99You Save $10.00 (11%) Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

Want to Solder, then this is the real deal!
What a difference from the so called helping hands circuit board holder, which is pure junk. Yes this is more expensive - but it holds the board securely and it is very easy to frequently manipulate it to place components and then rotate to solder it. The base well is very well designed to hold components while you complete your project. The solder spool and the soldering iron holders are well placed.Overall, I would highly recommend it to anyone who solders.
Top to learn more

May 13, 2009 (Yorba Linda, CA, USA) | Helpful Votes: 10 | Rating: 5

Perfect!
I bought this work station because I was tired of holding motherboards while trying to solder capacitors on them. This thing works perfectly. The included track is wide enough to fit most motherboards and you can purchase others if you need to hold something larger. There are many different adjustment points, which I view as both a good and bad thing because it's sometimes difficult to get the board positioned in the right place, but also gives you very fine control. The vise arms adjust approximately, then a spring-loaded lever tightens them to hold the board firmly. The reservoirs in the base are great for holding screws and electronic components. I really like the soldering iron stand attached to the base, because I hate having a separate soldering station. Overall, if you do any kind of work with circuit boards, I highly recommend this product!
Top to learn more

October 23, 2010 | Helpful Votes: 3 | Rating: 5

Product Description

PanaVise is a major manufacture of Vises and Work Holding Tools. PanaVise's Tilt, Turn & Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! All PanaVise Products are covered by a Limited Lifetime Warranty! Introducing the Panavise 324 ELECTRONIC WORK CENTER, Makes your work areas more efficient and manageable! This complete package creates an economical work station with everything right at your fingertips! This practical, pre-assembled combination includes a 315 Circuit Board Holder, a 300 Standard Base, a 312 Parts Tray Base Mount, and a 371 Solder Station. Single control knob and exclusive split-ball locks the Circuit Board Holder firmly into place. Release the knob pressure and Circuit Board Holder Tilts 90 degrees, Turns 360 & Rotates 360 and can be easily removed from the base. Base is compatible with all 300 series Heads. Height: 13.5-Inch (342.9mm) Weight: 4.5 lbs. (2kg). Limited Lifetime Warranty! Top to learn more

PanaVise 350 Multi-Purpose Work Center

Regular Price: $94.99 | Price with discount: $84.99 | You Save: $10.00 (11%)

Got a Question for me? Powered by Aol.com   Product Details Parts Tray Base Mount adds stability [8.5 (215.9mm) diameter] and has six individual trays to neatly hold small parts and tools Limited Lifetime Warranty! Height: 7.875 (200mm), Weight: 5.0 lbs. (2.3kg) Self-centering, extra-wide opening jaws open a full 9-Inch (228.6mm) and hold heavier objects by centering weight over base Ribbed, neoprene jaw pads are 1.875 (47.6mm) high x 1.5 (38.1mm) wide and provide a sure grip This item is eligible for FREE SHIPPING Sale Price: $84.99You Save $10.00 (11%) Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. Thank you for shopping with us!

Customer Review

Sturdy Base
I use the PV 350 without screwing it onto the table and I was surprise how stable it is, due it's low center of gravity. The jaws are precisely adjustable so that you can use just the right amount of pressure to hold but not destroy your work object. The tiny trays are helpful indeed. The relative small size allows you to store it easily. I switch often between different extensions witch can be done easily and quickly.
Top to learn more

January 30, 2010 (Switzerland, Zurich) | Helpful Votes: 4 | Rating: 5

A great thrid hand
The PanaVise 350 is a great third hand. It's solid and yet flexible. I'm using it as a soldering station. When I'm soldering it holds the boards perfectly stable. I have used Panavises for years, they have never dissapointed me.
Top to learn more

July 12, 2009 (Milwaukee, WI) | Helpful Votes: 4 | Rating: 5

great vice
The vice does what I intended it for. Holding small parts to paint/hold. The vice/holding fixture rotates and user friendly. I would buy again. Well constructed.
Top to learn more

March 28, 2010 (Derby, KS United States) | Helpful Votes: 3 | Rating: 5

Product Description

PanaVise is a major manufacture of Vises and Work Holding Tools. PanaVise's Tilt, Turn & Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! All PanaVise Products are covered by a Limited Lifetime Warranty! Introducing the Panavise 350 MULTI-PURPOSE WORK CENTER, Perfect for home repair or hobby needs! A versatile combination designed for holding larger, heavier objects. Very stable. An exceptional choice for any workbench! Self-centering, extra-wide opening jaws open a full 9-Inch (228.6mm) and hold heavier objects by centering weight over base. Parts Tray Base Mount adds stability [8.5 (215.9mm) diameter] and has six individual trays to neatly hold small parts and tools. Includes six non-marring, anti-skid pads. Ribbed, neoprene jaw pads are 1.875 (47.6mm) high x 1.5 (38.1mm) wide and provide a sure grip; reverse the pads and the wide V holds cylindrical objects Single knob controls head movement through 3-planes: 90 Degree Tilt, 360 Turn & 360 Rotation. Double-action jaws open/close quickly. Can be reversed to provide zero closure. Base accepts all 300 series Heads and any 5/8 (15.9mm) diameter shaft. Height: 7.875 (200mm), Weight: 5.0 lbs. (2.3kg). Limited Lifetime Warranty! Top to learn more